Echo Sounder & Speed Log Sensor Replacement
The diver identifies the echo sounder or speed log sensor, confirms its position and records the visible condition of the transducer face, housing and surrounding hull area.
Before removal, the vessel confirms equipment isolation, replacement parts, installation instructions and any internal preparation required for the sensor assembly.
The existing sensor or transducer is removed using suitable underwater tools and controlled methods. The replacement unit is positioned and installed according to the agreed technical procedure and equipment configuration.
Surface communication is maintained throughout the operation so underwater and internal vessel activities remain coordinated.
After installation, the diver visually checks the sensor seating, alignment and accessible sealing area and records the completed work using CCTV or photographs.
Electrical calibration, leak monitoring and functional testing are completed by the vessel's responsible technical personnel according to the equipment requirements.
Contact
- 3111 West Allegheny Avenue Pennsylvania 19132
-
1-982-782-5297
1-982-125-6378 - support@constrio.com
